Alltrade 940759 Powerbuilt Digital Torque Adaptor for 1/2-Inch Driver

Alltrade 940759 Powerbuilt Digital Torque Adaptor for 1/2-Inch Driver Reviews

The Alltrade Powerbuilt Digital Torque Adaptor for 1/2-Inch Driver takes the guess work out of applying proper torque to a nut or bolt, without the need for an expensive torque wrench. This versatile tool lets you instantly, safely convert a half-inch drive ratchet into a digital torque wrench. The torque adapter also lets you accurately calibrate any analog or digital torque wrench--right in your own garage.

Digital Torque Adapter for 1/2-Inch Driver At a Glance: Converts any ratchet into a torque wrench Calibrates your digital and analog torque wrenches Records both peak and trace torque Five torque measurement settings Memory slots record last 50 torque value readings

Instantly converts a 1/2-inch drive ratchet to a digital torque wrench. View larger.

A convenient hard-shell storage case is included. View larger.

Turn a Standard Ratchet into a Torque Wrench

Five torque settings

To turn a standard ratchet into a torque wrench, simply power up the Digital Torque Adapter and select your desired unit of measurement--foot pounds, inch pounds, Newton meters, kilogram centimeters, or kilogram meters. Next, enter your desired torque. The number will flash for 10 seconds before displaying zero, signaling you're ready to go. Select and insert a ratchet into the square drive opening on the top of the unit. Then select and attach your desired socket into the square drive fitting on the bottom of the adapter. That's it. Your ratchet is ready for use as a torque wrench.

Calibrate Any Torque Wrench
With the Digital Torque Adapter, you can calibrate your digital or analog torque wrench to increase your tool's precision, accuracy, and safety. To calibrate your wrench, place the Powerbuilt calibration cube in a bench vice and tighten securely. Set your torque wrench for a setting for calibration (for best results, set it about halfway through the range of the wrench). Then insert the assembled wrench and adapter into the calibration cube. Apply slow and continuous pressure to the wrench until you reach your target torque setting. Adjust the wrench as needed until your wrench setting matches the digital display on the Digital Torque Adapter. When the numbers match, your wrench is accurately calibrated.

LED indicator and audial notification

Built-in Safety Features
To prevent over-torque, the Digital Torque Adapter is equipped with built-in safety features. Its LED indicator flashes green, yellow, and red as your desired torque is approached and attained. In addition, an audio alert beeps with progressive frequency and finally turns to a steady tone when your specified torque is reached. With the Powerbuilt Digital Torque Adapter, you can get the precise torque you want without snapping a nut or bolt in the process.

What's in the Box
Digital torque adapter, calibration cube, hard-shell storage case, and lithium cell CR2032 battery.

Feature

• Convert any ratchet into a torque wrench
• Use as a calibration devise for existing torque wrenches
• 4 Torque measurement settings
• Light and audio notification when reaching specified torque
• Both peak and trace settings

Order cheap price at AMAZON save to day

*** IN STOCK This item ships for FREE with Super Saver and Ships from and sold by Amazon.com

Looking for Related Products

• Lisle 20610 Inline Spark Tester
• Raytek MT6 MiniTemp Infrared Thermometer
• Advanced Tool Design Model ATD-1351 5 Piece Adapter Set
• SE Clip Test Lead Set (10 Piece)
• Carrera Precision 6-Inch Titanium Digital LCD Caliper Micrometer

*** Product Information and Prices Stored: Jun 01, 2010 14:00:05